AUC Tools Overview
AUC Cell Washer
The Spin Analytical AUC Cell Washer is a simple, stand alone, fault tolerant
device for washing AUC cells without time consuming disassembly and reassembly.
This unique tool creates reproducible cell washing, rinsing and drying protocols,
allows the cell to remain assembled, and is faster than manual cleaning.
Product Description |
Former Spin Analytical Part# |
Nanolytics Instruments Part# |
Single-cell automated Cell Washer. |
SAAT109 |
430, in preparation |
AUC Cell Washer Accessories
Product Description |
Former Spin Analytical Part# |
Nanolytics Instruments Part# |
PEEK cell adapter for cell washer. |
SAAT012 |
430-PA, in preparation |
AUC Cell Assembly Torque Stand
Spin Analytical’s torque stand combines the strengths of older style stands,
resulting in a superior tool. Our torque stand uses a key which engages the slots
in the bottom of the cell housing to prevent rotation and a clamp that holds the
cell in place and prevents it from slipping out of the holder during torquing.
Product Description |
Former Spin Analytical Part# |
Nanolytics Instruments Part# |
Cell Assembly Torque Stand with dial torque wrench for assembly of AUC cells. |
SAAT003 |
420 |
AUC Torque Stand Accessories
Product Description |
Former Spin Analytical Part# |
Nanolytics Instruments Part# |
Replacement dial torque wrench for use with SAAT003. |
SAAT015 |
421 |
Replacement Key for torque stand shaft. |
SAAT013 |
422 |
AUC Cell Alignment Tools
The Spin CAT tool is used to align cells in
standard 4- or 8-hole rotors.
Product Description |
Former Spin Analytical Part# |
Nanolytics Instruments Part# |
Spin CAT cell housing alignment tool. |
SAAT001 |
suspended |
An alignment tool of other design is available.
AUC Cell Component Press
The cell component press is a tool for safely
ejecting the parts of an AUC cell, from the cell housing. In some cases,
cell components can become stuck in the cell housing and can be extremely
difficult to remove. The cell component press can be used to remove these
stuck components.
Product Description |
Former Spin Analytical Part# |
Nanolytics Instruments Part# |
Cell component press for safely removing components from cell housing. |
SAAT002 |
410, in preparation |
More Tools
Product Description |
Former Spin Analytical Part# |
Nanolytics Instruments Part# |
Fill hole gasket punch kit. Punch, gasket material, and stainless steel pick. |
SAAT004 |
discontinued |
Standard 5/64” hex driver. |
SAAT005 |
816-HK |
Adjustable torque screwdriver for socket head AUC cell fill screws. |
SAAT007 |
816-AT |
Cell holder filling station, (8) cell places. |
SAAT018 |
440, new design |
Cell holder filling station, (4) cell places. |
SAAT019 |
discontinued |